Changing Job Settings For The Entire Image - Gestetner CS210 Color Manual

Changing Job Settings for the Entire Image

You can change job settings for the entire image during area editing.
The job settings that can be changed are as follows:
Paper Select, see page 47.
Reduce/Enlarge (Preset R/E, Zoom, Size Magnification, Directional Magnification, Poster Mode),
Shift, see page 77.
Margin Adjustment, see page 78.
Sort/Stack/Staple (Option),
Note
Regarding functions that cannot be used together in area editing,
When you set Shift and designate more than one area in this mode, the minimum size rectangle that includes all the
designated areas is shifted as follows:
1
Press the [Basic Settings] key.
2
Change the job settings.
3
Press the [OK] key.
158
Changing Job Settings for the Entire Image
see page 102.
1: Designated area
2: Area that will be shifted
see page 164.
see page 59.