Gestetner 5308L User Manual page 69

SilverV-EN.book Page 31 Monday, May 15, 2000 3:23 PM
D
With the number keys, enter the
number of prints for the second
original.
E
Press the { { { { q q } } } } key.
q q
This stores the number of prints to
be made for the second original in
memory 2.
Note
Repeat steps D and E for each
original.
The number of prints for up to
20 originals can be stored.
F
Press the { { { { q q } } } } key again. q q
The memory returns to memory 1.
Note
If you store the number of prints
for 20 originals, the memory
number returns to 1. It is not
necessary to press the {q} key.
Memory Mode—Group Printing from Different Originals
G
Set the first original face down on
the exposure glass.
TSLS011N
Note
Set originals one sheet at a time
in the same order that you
stored them in memory.
H
Press the { { { { Start} } } } key.
I
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
TSLS01TN
ing the Print Image Position For-
ward or Backward") or the side
tray fine adjusting dial (see
P.10 "Shifting the Print Image Po-
sition to the Right or Left").
1
TSLH010E
TSLS012N
P.9 "Shift-
31