Gestetner 5308L User Manual page 67

SilverV-EN.book Page 29 Monday, May 15, 2000 3:23 PM
E
Turn on the optional tape dis-
penser power switch.
O n
O f f
F
Set one original face down on the
exposure glass or in the optional
document feeder.
G
Press the { { { { Start} } } } key.
H
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
ing the Print Image Position For-
ward or Backward") or the side
tray fine adjusting dial (see
P.10 "Shifting the Print Image Po-
sition to the Right or Left").
Class Mode—Group Printing from the Same Original
I
Make your prints.
TSLP013E
Note
After the last page of each print-
ing set is fed out to the paper de-
livery tray, the tape dispenser
drops a strip of paper on the top
of the paper stack.
If the power switch of the op-
tional tape dispenser is turned
off or the tape dispenser is not
installed in your machine, the
group printing cycle stops after
each set is delivered. Remove
the set of prints from the paper
delivery tray and press the
{Print} key to start the next
TSLS012N
group printing cycle.
P.9 "Shift-
1
29