Table of Contents
Advertisement
Printer Setting Tool
P-touch Template Settings Dialog Box
1 Default Command Mode
In order to use P-touch Templates, select the [P-touch Template] mode.
Available settings: [P-touch Template], [ESC/P], [Raster]
2 Default Template Number
Specify the template number selected as the default when the printer is turned on.
However, if any template has been set to not be transferred to the printer, the number of that template
cannot be specified.
3 Data Delimiter for P-touch Template
A delimiter is the symbol used to indicate when to move to the next object in the data being sent. Between
1 and 20 characters can be specified.
4 Trigger for P-touch Template Printing
Select one of the following three options for the print start trigger.
[Command Character]: Printing starts when the command character specified here is received.
[Data Insertion into All the Objects]: Printing starts when the delimiter for the last object is received.
[Received Data Size]: Printing starts when the number of characters specified here is received. However,
delimiters are not counted in the number of characters.
5 Character Code Table
Select one of the following three character code sets.
Available settings: [Windows 1252], [Windows 1250 Eastern Europe], [Brother standard]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3
3
82
Advertisement
Table of Contents
Troubleshooting
