Table of Contents
Advertisement
Quick Links
Overview
The NMX-WP-N2510 4x1 Windowing Processor accepts up to four real-time HD streams and then allows you to combine and customize
them into a single output stream. This1RU rackmount appliance connects to the video over IP network and accepts video streams (from
N2000 Series Encoders) via a single network port. Each input can be cropped, scaled, and positioned according to stored presets (such as
quad, window-in-window, 3+1, etc.) or in any user-defined configuration. The combined output video stream can then be routed as a
single, compressed stream to one or more displays via the same network port.
NOTE: For proper operation, all four U ports must be connected to active streams.
Connect N2000 streams to any of the P0-P2 ports. To achieve larger stacked configurations, additional Windowing Processors can be used
as input streams (using any P0-P2 port).
NMX-WP-N2510
N2510 Windowing Processor Front View
N2510 Windowing Processor Rear View
QUICK START GUIDE
N-Series Windowing Processor, 4x1
Advertisement
Table of Contents
Related Manuals for Harman AMX N Series
Summary of Contents for Harman AMX N Series
- Page 1 QUICK START GUIDE NMX-WP-N2510 N-Series Windowing Processor, 4x1 Overview The NMX-WP-N2510 4x1 Windowing Processor accepts up to four real-time HD streams and then allows you to combine and customize them into a single output stream. This1RU rackmount appliance connects to the video over IP network and accepts video streams (from N2000 Series Encoders) via a single network port.
-
Page 2: Establishing Connection
Establishing Connection Before using your N2510 unit, it must be configured using the free N-Able device management software. However, you will not be able to configure units until they are in the same subnet as the host computer. N-Series devices are shipped in Auto-IP mode with a default IP address of 169.254.xxx.xxx. -
Page 3: Logging In Using N-Able Software
Logging in Using N-Able Software Once the units have been discovered in N-Able, view them on the Unit Management tab. N2510 units have Windowing Processor listed in their Type fields (as shown in FIG. 2). FIG.2 FINDING UNIT ON THE UNIT MANAGEMENT TAB Double-click any device to view its control page. - Page 4 Arrangement Page The Arrangement page (shown in FIG. 4) is the main control area. It is a combination of arrange, stretch, and skew options. The view in the top portion of the page represents the overall screen setup you are creating. From there, position and stretch windows by dragging-and- dropping, resizing, or directly inputing values.
- Page 5 Presets Using either pre-configured (factory) presets or custom presets that you create yourself, quickly manipulate the arrangement/stretch/ skew of the windows. Create your own presets by clicking the button (pointed out previously in FIG. 4) and making choices in the Save Preset dialog box (shown in FIG.
-
Page 6: Crop/Pan/Zoom Page
Crop/Pan/Zoom Page The Crop/Pan/Zoom page allows finer control of the individual windows. See FIG. 7. Crop coordinates Selected crop area Window selection Window resolution Click Take to apply setting changes. Enable Aspect Ratio to crop to the window’s current resolution. FIG.7 CROP/PAN/ZOOM PAGE Page 6... - Page 7 Unit Settings Page The Unit Settings page (shown in FIG. 8) allows you to configure unit and network settings as well as import/export presets for your Windowing Processor. Available options include: • Device Name: Configure a user-friendly name for your unit. •...
-
Page 8: Specifications
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/ Last Revised: 05/2017...