Table of Contents
Advertisement
Automatic rinsing cycle
When the machine has heated up, it performs an automatic rinsing cycle
to clean the internal circuit with fresh water. This takes approximately one
minute.
1
Place a bowl under the coffee spout.
, The on/off button flashes slowly.
2
Water flows from the coffee spout.
Wait until the water stops coming out of the coffee spout.
Note: You can stop the automatic rinsing cycle by pressing the coffee button.
3
When the on/off button lights up continuously, the machine is ready
to brew coffee.
Note: The automatic rinsing cycle also takes place 15 minutes after the
appliance switches to standby mode or switches off.
Note: The first cups of coffee may be a bit watery, this is normal. The machine
needs to complete a few brewing cycles to optimise its settings.
ENGLISH
11
Advertisement
Chapters
Table of Contents
