Page 1
M O D E L S : GBE 100-115T GBE 100-210T series are configured as single channel, 100 watt...
Page 2
INPUT – The GBE-100 is equipped with a standard ¼” unbalanced input. Input sensitivity can be switched from approximately 300 mV (passive) to 1.25 volt (active). The input impedance is 500 k ohms. The precision input scaling preamp contains a 36 Hz, 12 dB/octave high pass filter (more effective and less intrusive than the more common 6 dB filters) and an “RFI”...
Page 3
Only persons familiar with the operation of high-powered audio equipment should attempt to operate this device. In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and it’s designers, sales agents and all other affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.
Page 4
SAMPLE SETTINGS Rev. 1 7811 E. Pierce Street, Scottsdale, AZ 85257 PH: 480-941-0705 FAX: 480-946-2412 www.genzbenz.com...
Need help?
Do you have a question about the GBE 100-115T and is the answer not in the manual?
Questions and answers
Where do I put the bass guitar chord in the amp do I put it in the output or the input