Page 1
DUAL OUTPUT DESIGN 200 watt Power Amp Active/Passive Input Shape Circuit w/ Low Boost, Mid Scoop & Signal Attack PRODUCT DESCRIPTION – OUTPUT DESIGN, single channel, 200 watt bass guitar amplifier. It is equipped with ¼” unbalanced instrument input, active/passive switch with LED indicator, variable input gain, 3 switched signal pre- shape filters with LED indicators, 3 band active equalization with parametric midrange, master volume control, ¼”...
Page 2
INPUT – The ML-200 is equipped with a standard ¼” unbalanced input. Input sensitivity can be switched from approximately 300 mV to 1.25 volt. The input impedance is 500k ohms. The precision input scaling preamp contains a 36 Hz, 12 dB/octave high pass filter (more effective and less intrusive than the more common 6 dB filters) and an “RFI”...
Page 3
In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and it’s designers, sales agents and all other affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.
Page 4
7811 E. Pierce Street, Scottsdale, AZ 85257 PH: 480-941-0705 FAX: 480-946-2412...
Need help?
Do you have a question about the ML 200-210T and is the answer not in the manual?
Questions and answers