Input Jacks - Decware SE84UFO3 Owner's Manual

OWNERS MANUAL for Model SE84UFO3 PAGE 5
f
HOOK-UP
Sources

INPUT JACKS!

The RCA input jacks are arranged with both a silver and a gold jack.
Both of these jacks do the same thing and only one should typically be
used at a ?me. If your interconnects are gold, use the gold jack. If
your interconnects are silver, use the silver jack.
Preamps
This amplifier has been designed in such a way that you may use it
with or without a pre-amp. To that effect it has been equipped with a
volume control .
If using a preamp, connect the output of the preamp to one of the two
input jacks on the amplifier and set the amplifier's volume control
somewhere between 1/2 way up and full. Use the volume control on
your preamp to adjust listening volumes.
This amplifier requires about 2 volts to come to full power. 2 Volts is
Sensi?vity
the average output signal level found in most line level devices such as
CD players and DACs. This means that most of the ?me you will have
to turn the volume control nearly all the way up before you can get
the amplifier to distort.