Table of Contents
Advertisement
USB 2.0 connectors (10-1 pin USB1112,USB1314)
Connect a USB module cable to any of these connectors, then install the module
to a slot opening at the back of the system chassis. These USB connectors comply
with USB 2.0 specifications and support up to 480Mbps connection speed.
LPC Debug header
This header allows connection to a LPC debug card.
•
•
•
LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer.
LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-
compatible computers.
Serial port connectors (10-1 pin COM)
Connect the serial port module cable to any of these connectors, then install the
module to a slot opening at the back of the system chassis.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
HD Audio standard. Connect one end of the front panel audio I/O module cable to
this connector.
•
•
PCI slot
The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other
cards that comply with PCI specifications.
Mono out header (2-pin MONO_OUT)
This internal mono out header allows connection to an internal, low power speaker
for basic system sound capability. You can connect a 3W speaker to this header,
but the subsystem is capable of driving a speaker load of 2 Ohms at 2 Watts (rms).
1-4
Scan the QR code to view the meaning of each
debug code.
Debug codes are only available for ASUS LPC
debug card.
Contact your region sales representative for LPC
debug header ordering.
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD Audio]. By default, this
connector is set to [HD Audio].
Chapter 1: Product introduction
Advertisement
Table of Contents
