Switching The Appliance On; Setting The Temperature; Alarm Function - Siemens GU D Series Instructions For Use Manual

Built-under appliance
Table of Contents

Advertisement

en
Switching
the appliance on
Fig. 2
Press the On/Off button 2, the button is
lit. The temperature alarm is switched off
by pressing the alarm button 5*. The
alarm display 4 lights up until
the appliance has reached the set
temperatures.
We recommend the medium setting.
Operating tips
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
The refrigeration system may cause
several areas of the freezer shelves to
frost quickly. This does not affect
function or power consumption. The
appliance does not require defrosting
until the entire surface of the freezer
shelf is covered with more than 5 mm
of frost or ice.
8
Setting
the temperature
Fig. 2
Set the temperature controller 1 to
a number with a coin. The higher
the number, the lower the temperature.

Alarm function

* Not all models.
The warning signal switches on if the
freezer compartment is too warm.
Switching off the warning signal
Press the alarm button to switch off the
warning signal. Fig. 2/5*
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.
Alarm display
The display lights up if the freezer
compartment becomes too warm. Frozen
food is at risk of thawing.
The alarm may switch on without any risk
to the frozen food:
when the appliance is switched on,
when large quantities of fresh food are
placed in the appliance,
when changing the temperature
controller to a higher number.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gu15da50gb

Table of Contents