Mode Change Slider; Programming Conversion; Calibrating - Spektrum SPMR8105 Instruction Manual

EN
PHYSICAL TRANSMITTER ADJUSTMENTS

Mode Change Slider

The DX8e has a unique slider located on the back of the transmitter that allows for simple mode changes. The slider can also be used to
change each mode into a "quadcopter mode." This mode snaps both stick to the center position.
Mode 2, 4
Mode 2, 4
Mode 2, 4
Quadcopter
Open the protective slider door and move the slider to the desired
position. All changes happen automatically inside the transmitter.
If you are changing from mode 2(4) to mode 1(3) you must fi rst go
into the System Settings and change the mode in the programming.

Programming Conversion

1. Access the System Settings menu from the Setup List
and select the desired Mode.
2. Exit the System Settings menu to save the selection.

Calibrating

After changing modes, the transmitter will need to be calibrated.
See the calibration section in System Settings.
44
Mode Slider
Slider Door
Mode 2, 4
Quadcopter
Mode 1, 3
Mode 1, 3
Quadcopter
SPEKTRUM DX8e • TRANSMITTER INSTRUCTION MANUAL