Installation - LG UHXM120BA1 Installation Manual

FLARING WORK AND CONNECTION OF PIPING
24

Installation

- This unit may be installed suspended from the ceiling or mounted on the wall.
- This unit may only be installed horizontally , as shown in the diagram below.(Side B is facing up)
However, it may be freely installed in any direction forward or back, and to the sides.
- Be sure to leave a 600 mm square opening for service and inspection as shown in the diagram
below, for both ceiling - suspended installation and wall-mounted installation.
- This unit "does not require drain treatment" as it uses internal foam treatment as low-pressure
piping insulation.
- Service direction is the side B and C
- The piping for the indoor unit may be led around in direction A
- The inclination of side B must be within ±5 degrees forward or back or to the sides.
A
Suspension bolt pitch.
(36) 50 50 50
(56) 50 50 50
Min 400
(Servicing space)
245
Main Pipe
72 300 60
Branch Pipe Cover Control
Min 400
Ø 19.05
Ø 9.52
B
30 50
C
Inspection opening
600
[unit:mm]