Daily Use - Electrolux ESL7845RA User Manual

How to fill the rinse aid
dispenser
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1. Open the lid (C).

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
9.1 Comfort Lift
CAUTION!
Do not sit on the rack. Do
not put excessive pressure
on the locked basket.
CAUTION!
Do not exceed the max load
capacity of 18 kg.
A B
C
2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A)
becomes clear.
When the rinse aid
dispenser needs refilling, the
display shows a message.
If you use multi-tablets and the drying
performance is satisfactory, the rinse aid
refill indication can be disabled by setting
the rinse aid level to 0.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
CAUTION!
Use only a detergent
specifically designed for
dishwashers.
To ensure correct unlocking,
lift the trigger handle
completely and the basket
slightly until the basket is
disengaged on both sides.
The Comfort Lift mechanism allows to lift
the lower rack up (to the second rack
level) and put it down to load and unload
dishes easily.
To move the lower basket from the lower
position:
1. To lift the basket pull the rack out of
the dishwasher by the rack handle.
The trigger handle should not be
used.
ENGLISH 15