Napoleon Cinema NEFB27HG Installation And Operating Instructions Manual page 22

22
SYMPTOM
led Flashing
EN
power Failure
e1 error code
e2 error code
W415-1662 / 05.17.16
PROBLEM
appliance has overheated and
safety thermal switch has tripped
appliance has returned to default
settings
thermostat wire not connected to
pcB
thermostat wire connection to pcB
is loose
thermostat has failed
thermostat shorting
pcB thermostat connection is
shorting
TEST SOLUTION
unplug power or turn off the circuit breaker, allow
appliance to cool for 15 minutes, then plug in or turn the
circuit breaker on.
re-program appliance to original settings.
connect wire.
Connect wire fi rmly to PCB.
replace thermostat.
replace thermostat.
replace pcB.
42.37