Automatic Cleaning Programmes - Krups Barista EA9000 Series Manual

8.2 Automatic cleaning programmes

n
Automatic cleaning programme of the coffee circuit
A message on the screen will indicate when a cleaning programme needs to be run for the appliance.
Cleaning is required around every 360 preparations.
To run this cleaning programme, you will need a recipient with a capacity of at least 0.6 litres which
can fit underneath the coffee nozzle, and a KRUPS cleaning tablet (two of which are supplied in the
Welcome Pack).
The automatic cleaning programme has three phases: one cleaning cycle and two rinsing cycles. It
lasts around 20 minutes.
Protect your worktop from any splashes during the cleaning and descaling cycles, especially if it is
made of marble, stone or wood.
!
Caution: You are not obliged to carry out the cleaning programme immediately the appliance
requests it, but it must be carried out reasonably soon.
Only use KRUPS cleaning tablets otherwise the guarantee will not cover any material
damage caused by the use of other brands of tablets. Cleaning tablets are available from
your KRUPS After-Sales Service Centre.
! Caution: To respect the guarantee conditions, the cleaning cycle must be carried out when the
appliance requests you not to postpone it further.
Here are the main steps in this programme. Otherwise, just follow the instructions on the screens
displayed by the machine.
You can access the "Maintenance" menu from the main menu
n
by pressing the "Maintenance" tab.
Press the "Cleaning coffee circuit" button on the touch screen.
n
1
To quit the "Maintenance" menu, press the "Maintenance" tab.
n
Empty the used coffee collector, remove and empty the drip trays, and fill the water tank.
n
2
ENGLISH
41