Advertisement
Available languages
Available languages
to arrange the cord so that it can-
not be pulled or be tripped over.
12. This appliance is not intended
for use by children and other per-
sons whose physical, sensory, or
mental capabilities or lack of ex-
perience and knowledge pre-
vents them from using the
appliance safely without supervi-
sion or instruction by a responsi-
ble person to ensure that they
can use the appliance safely.
SPECI L INSTRUCTIONS
16. the iron is not to be used if it has been dropped, if there are vi-
sible signs of damage or if it is leaking.
17. Warning ! The voltage of your electrical outlet must correspond
to that of the iron (120V). Connecting to the wrong voltage may
cause irreversible damage to the iron and will invalidate the gua-
rantee.
18. If an extension cord is absolutely necessary, a 15 ampere cord
should be used. Cords rated for less amperage may overheat. Care
should be taken to arrange the cord so that it cannot be pulled or
tripped over.
S VE THESE INSTRUCTIONS
What water to use?
Your appliance has been designed to function with untreated tap water. If your water is
very hard (check with your local water authority), it is possible to mix untreated tap
water with store-bought distilled or demineralised water in the following proportions:
- 50% tap water, - 50% distilled or demineralised water.
However, it is necessary to operate the Self-Clean function regularly in order to
eliminate hard water deposits from the steam chamber.
Use the self-clean function approximately every 2 weeks. If the water is very hard clean
the iron weekly
Types of water not to use?
Heat concentrates the elements contained in water during evaporation.The types of
water listed below contain organic waste or mineral elements that can cause spitting,
brown staining, or premature wear of the appliance: water from clothes dryers, scented
13. Children should be super-
vised by the responsible per-
son to ensure that they do not
play with the appliance.
14. the iron must be used and
rested on a stable surface;
15.when placing the iron on its
stand, ensure that the surface on
which the stand is placed is sta-
ble.
13
* depending on model
EN
Advertisement
