Specifications; Power Supply - Makita GA7061R Instruction Manual

SPECIFICATIONS

Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
Only for model GA7061 / GA9061
Switching operations of electric apparatus cause volt-
age fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.24 Ohms it can be
GA7061 GA7061R
180mm
M14 or M16 or 5/8" (country specific)
-1
8,500min
5.5kg
2 ENGLISH
GA9061
6.5mm
450mm
/II
presumed that there will be no negative effects. The
mains socket used for this device must be protected
with a fuse or protective circuit breaker having slow
tripping characteristics.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model GA7061
Sound pressure level (L
pA
Sound power level (L ) : 102 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model GA7061R
Sound pressure level (L
pA
Sound power level (L ) : 102 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model GA9061
Sound pressure level (L
pA
Sound power level (L ) : 102 dB (A)
WA
Uncertainty (K) : 3dB(A)
Model GA9061R
Sound pressure level (L
pA
Sound power level (L ) : 102 dB (A)
WA
Uncertainty (K) : 3dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model GA7061
Work mode: surface grinding with normal side grip
Vibration emission (a ) : 7.0 m/s
h, AG
2
Uncertainty (K) : 1.5 m/s
Work mode: surface grinding with anti vibration side grip
Vibration emission (a ) : 6.5 m/s
h, AG
2
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with normal side grip
Vibration emission (a ) : 2.5 m/s
h, DS
2
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding with anti vibration side grip
Vibration emission (a ) : 2.5 m/s
h, AG
2
Uncertainty (K) : 1.5 m/s
GA9061R
230mm
-1
6,600min
5.7kg
) : 91 dB(A)
) : 91 dB(A)
) : 91 dB(A)
) : 91 dB(A)
2
2
2
2
or less