Table of Contents
Advertisement
Available languages
Available languages
Maintaining your appliance
Removing heavy, burned-on residue
66 English
NE59J7850WS_AA_DG68-00600A-01_EN.indd 66
1. Allow the cooktop to cool.
2. Use a single-edge razor-blade scraper at
approximately a 45 ° angle against the
glass surface and scrape the soil. It will
be necessary to apply pressure to remove
the residue.
3. After scraping with the razor scraper,
spread a few drops of ceramic cooktop
cleaner on the entire burned residue
area. Use the cleaning pad to remove any
remaining residue. (Do not scrape the
seal.)
4. For additional protection, after all residue
has been removed, polish the entire
surface with the cooktop cleaner and a
paper towel.
Removing metal marks and scratches
1. Be careful not to slide pots and pans
across your cooktop. It will leave marks
on the cooktop surface. You can remove
these marks by applying ceramic cooktop
cleaner with a cleaning pad for ceramic
cooktops.
2. If pots with a thin overlay of aluminum
or copper are allowed to boil dry, the
overlay may leave black discoloration
on the cooktop. You should remove this
discoloration immediately or it may
become permanent.
WARNING
Carefully check the bottoms of pans for
roughness that may scratch the cooktop.
2015-04-23
10:32:08
Advertisement
Table of Contents
