Table of Contents
Advertisement
Network Camera User Manual
Calling a Preset
Setting/Calling a Patrol
Note:
No less than 2 presets have to be configured before you set a patrol.
Steps:
1. Click
to enter the patrol configuration interface.
2. Select a path No., and click
to add the configured presets.
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
Figure 5-6 Add Patrol Path
6. Click OK to save a patrol.
7. Click
to start the patrol, and click
to stop it.
8. (Optional) Click
to delete a patrol.
40
Advertisement
Table of Contents
