Table of Contents
Advertisement
Installing a Nano SIM card
To install a Nano SIM card:
1.
Push a pin into the hole on the Nano SIM card tray to eject it.
Insert the Nano SIM card(s) into the card slot(s).
2.
Push the tray to close it.
NOTES:
•
Both Nano SIM card slots support GSM/GPRS/ EDGE,
WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE DSDV
network bands. Both Nano SIM cards can connect to VoLTE
4G calling service. But only one can connect to FDD-LTE, and
TD-LTE data service at a time.
•
Contact your telecom carrier if DSDV support is available in
your area.
CAUTION!
•
Do not use sharp tools or solvent on your device to avoid
scratches on it.
•
Use only a standard Nano SIM card on your ROG Phone.
Advertisement
Table of Contents
