Installing A Nano Sim Card - Asus ROG-PHONE 05 User Manual

Installing a Nano SIM card

To install a Nano SIM card:
1.
2.
U18354-2_ZS676KS_Entry_(I005DA_60W)_UM_Booklet_WW.indb 7 U18354-2_ZS676KS_Entry_(I005DA_60W)_UM_Booklet_WW.indb 7
IMPORTANT!
• When using your ROG Phone while it is plugged to a power
outlet, the grounded power outlet must be near to the unit
and easily accessible.
• When charging your ROG Phone through your computer,
ensure that you plug the USB Type-C cable to your
computer's USB port.
• DO NOT charge your ROG Phone underwater or when the
USB connector is wet.
• Avoid charging your ROG Phone in an environment with
ambient temperature of above 35
NOTES:
For safety purposes, use ONLY the bundled power adapter
•
and cable to avoid damaging your device and prevent the
risk of injury.
For safety purposes, use ONLY the bundled power adapter
•
and cable to charge your ROG Phone.
• The input voltage range between the wall outlet and this
adapter is AC 100V - 240V. The output voltage of the AC
power adapter for this device is +5V-20V 3A, 60W.
Push a pin into the hole on the Nano SIM card tray to eject it.
Insert the Nano SIM card(s) into the card slot(s).
Push the tray to close it.
° °
C (95 F).
2021/7/16 16:12:36 2021/7/16 16:12:36
7