Table of Contents
Advertisement
Installing a nano SIM card
Your nano SIM card slot supports
NOTE: To prevent connector damage, ensure to use a standard nano SIM card without a SIM adapter or the use of a
cutter.
CAUTION! Be extra careful when handling a nano SIM card. ASUS is not responsible for any data loss or damage
incurred to your nano SIM card.
To install a nano SIM card:
1. With the phone facing up, insert the tool that came with your phone into the hole beside the SIM/
microSD card tray and gently press to open the tray.
CAUTION!
• Be careful not to damage the card slot cover or injure your fingernails when you remove the cover.
• Do not forcibly remove, shear, or distort the card slot cover.
• Do not use sharp tools or solvent on your device to avoid scratches on it.
2.
Place the nano SIM card into the slot (as shown) with the gold contacts facing down.
3.
Gently push the tray back in until it's securely closed.
IMPORTANT! When two SIM cards are inserted, only one SIM card slot supports 4G/3G service. The
other SIM card slot only supports 3G service.
GSM, WCDMA, FDD-LTE, and TDD-LTE
bands.
Chapter 1: Basics
9
Advertisement
Table of Contents
