Configuration File - IME enginko EGK-LW20W00 Operating Manual

Last update: 2022/05/17 15:44
To bring back the sensor to factory default and reset the passwords, a reset code must be requested
to enginko (please provide the DevEUI of the sensor when you ask for that code).
6 Configuration file
WIth LoRa Tool App is possible to configure the device using an XML file, instead to manually adjust
the parameters (for details about the file format please ask to enginko). This is very useful especially
in case of multiple devices configuration.
With "Save" button an XML file with the actual configuration of the sensor will be generated. This is
useful to store or clone the configuration, or to send it to enginko's support if needed.
https://www.enginko.com/support/
manual_egk-lw20w00 https://www.enginko.com/support/doku.php?id=manual_egk-lw20w00
www.ime.de
Printed on 2022/07/07 14:23