Power On/Off - IME enginko EGK-LW20W00 Operating Manual

2022/07/07 14:23

2.3 Power ON/OFF

The sensor is shipped completely off to prevent battery consumption during storage. It is therefore
necessary to carry out a first power-on prior to commissioning.
To power on the sensor: lay the magnet at the bottom of the provided tool into the area shown in the
figure:
e n g i n k o . s u p p o r t . c e n t e r - https://www.enginko.com/support/
9/31
www.ime.de
manual_egk-lw20w00