[Menu(2)] - NEC PA723U User Manual

[MENU(2)]

[MENU ANGLE]
Select the direction for displaying the menu.
[MENU POSITION]
Shift the menu displaying position.
HORISONTAL POSITION �����Shift the menu in the horizontal directions�
VERTICAL POSITION ����������Shift the menu in the vertical directions�
RESET ���������������������������������Reset the menu displaying position to the default factory setting (the screen center)�
TIP
• Once the projector is powered off, the menu displaying position will reset to the default factory setting.
• Input terminal and message displaying position are not influenced by the [MENU POSITION].
• It enables to move the menu by mouse click when a commercially available USB mouse is connected.
• It enables to move the menu position by the ▼▲◀ and ▶ buttons holding to press the CTL button on the remote control or
mouse click.
• While the MENU POSITION of the on-screen menu is displayed on and the menu is moved by the ▼▲◀ and ▶ buttons holding
to press the CTL button on the remote control, the indication of adjusted value on the menu will not be changed. In this case,
close the MENU POSITION menu once and display it again for indicating the adjusted value properly.
113
5. Using On-Screen Menu