The use of the DCW Technology removes the diffraction effects to a large extent. Moreover, the 1039A has ver- satile crossover controls to compensate and adjust response variations due to different loudspeaker positioning and room loading.
Page 3
Figure 1: The location of the acoustical axis of the 1039A in horizontal and vertical configura- tion crossover. The Bass, Midrange and Treble level controls operate in 1 dB steps. Fur- thermore, the Bass Tilt and Roll-off controls both have four 2 dB steps to allow refined low frequency response tailoring.
Page 4
* Note that the cable connectors require additional 100 mm (4”) of space behind both the amplifier and the speaker cabinet. Genelec Document BBA39001a. Copyright Genelec Oy 4.2007. All data subject to change without prior notice AmpliFier Section Bass amplifier output power with...