Clean The Humidification Filter; Replacing The Humidification Filter - Philips 4803/01 User Manual

4
Clean the inside of the water tank
with a soft clean cloth.
5
Empty the water tank into a sink.
6
Put the humidification filter and the
filter support back into the water
tank.
Clean the humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Take out the humidification filter
and the filter support from the water
tank (fig. o).
2
Remove the humidification filter
from the filter support (fig. p).
3
Soak the humidification filter in tap
water for one hour (fig. q).
4
Rinse the humidification filter
under a slowly running tap. Do not
squeeze or wring the filter when
cleaning (fig. r).
5
Let excess water drip off the
humidification filter.
6
Assemble the humidification filter
round the filter support (fig. d).
7
Put the humidification filter and the
filter support back into the water
tank (fig. e).
8
Put the upper unit back onto the
water tank (fig. g).
Note
•
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
•
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
EN
10
6 Replacing the
humidification
filter
Replace the humidification filter every
three months for optimal performance.
If the filter is in good condition, you
could use it for a longer period of time.
Make sure to replace the humidification
filter at least once a year.
Note
•
Use only Philips original humidification
filter HU4102.
•
Always unplug the humidifier before you
replace the humidification filter.
Tip
•
Register your product at
www.philips.com for further information
on how to replace your filter.
1
Take out the humidification filter
and the filter support from the water
tank (fig. o).
2
Remove the humidification filter
from the filter support. Discard the
used filter (fig. s).
3
Remove the packaging material from
the new humidification filter (fig. c).
4
Assemble the new humidification
filter around the filter support (fig. d).
5
Put the filter and the filter support
back into the water tank (fig. e).
6
Put the upper unit back onto the
water tank (fig. g).
Tip
•
You can easily find more information
about how to replace the filter in our
web page or by calling our Consumer
Care Center.