Keep-Warm Mode; Adjusting The Cooking Time And Temperature - Philips HD3137/78 User Manual

» To set a different cooking time and
temperature, refer to chapter "Adjusting
the cooking time and temperature".
4 Press the start button (On/Off) to start
cooking.
5 When the cooking is finished, you will hear
4 beeps and the selected cooking function
light will be off.
6 The multicooker will be in keep-warm
mode automatically.
» The keep-warm indicator (Chaud) lights
up.
Note
• If you cook food at a temperature below 70°C,
please turn off the keep-warm mode before
start cooking.
•
In manual (Manuel) mode, when cooking at
a temperature higher than 130°C, the top lid
must be opened during cooking.

Keep-warm mode

The multicooker provides you with easy
control over the keep-warm mode.
• After you have selected the cooking
function using the menu button (Menu),
if you press the start button (On/Off)
directly, the keep-warm indicator will
light up. After the cooking is finished, the
multicooker will switch to keep-warm mode
directly.
• After you have selected the cooking
function using the menu button (Menu), if
you press the keep-warm button first, and
then the start button (On/Off), the keep-
warm indicator will be off. After the cooking
is finished, the multicooker will be in standby
mode.
Note
•
In standby mode, you can press the keep-
warm button (Chaud) to enter keep-warm
mode.
•
In keep-warm mode, you can press the keep-
warm button (Chaud) to enter standby mode.
Adjusting the cooking time and
temperature
You can adjust the cooking time for all
functions except the rice/pasta , roast, and
risotto functions; and you can adjust the
cooking temperature for baking and manual
functions. Refer to the "Functions overview"
table for the time and temperature regulation
of each function.
After you have selected the desired cooking
function using the menu button, the default
cooking time will be displayed on the screen.
1 To set a different cooking time, press the
cooking time button (Temps de cuisson),
and the default cooking time starts flashing
on the display.
2 Press the increase (+) or the decrease (-)
button to set the hour unit.
3 After the hour unit is set, wait for a few
seconds before the hour unit is confirmed,
and the minute unit starts flashing on the
display.
4 Press the increase (+) or the decrease (-)
button to set the minute unit.
EN 13