Advertisement
EN
Loading Media
TC
裝入材料
[ 3 [
[ 4 [
[ 5 [
Align the bottom end of the adjustment paper with the bottom end of the lower label on the eject guide.
Align the right end with the longest scale marks on both labels, which are positioned in the middle of the labels.
After aligning the positions, lower move the media loading lever down.
將調整用紙的底端與出紙導板上的下方標籤底端對齊。
將右端與兩個標籤上正中間最長的刻度線對齊。
位置對齊後，向下移動材料設定調整桿。
At the rear side of the printer, pull the adjustment paper straight down, and place it over the label on the front bar of the feeding unit.
Use a marker such as an oil-based pen to mark the left end position of the adjustment paper on the label.
在印表機背面，將調整用紙筆直下拉，然後將其置於材料進紙單元上靠您這邊長桿的標籤上。
使用油性筆等記號，標示調整用紙的左側位置。
22
Advertisement
