Table of Contents
Advertisement
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
shock hazard. Ensure that
the cut off plug is disposed
of safely.
3.8 Replacement of the
connection cable
The replacement of electric
cable must be carried out
exclusively by the service
force centre or by personnel
with similar competencies, in
accordance with the current
regulations.
Make sure that the cable
section is applicable to the
voltage load and the
working temperature. The
yellow/green earth wire (B)
must be approximately 2 cm
longer than the live and
neutral wire (A).
3.9 Attaching the seal - On-top
installation
1. Clean the worktop around the cut
out area.
2. Attach the supplied thinner seal
stripe to the lower edge of the hob
along the outer edge of the glass
ceramic. Do not extend it. Make sure
that the ends of the seal stripe are
located in the middle of one side of
the hob.
3. Add some mm when you cut the seal
stripe to the length.
4. Push the two ends of seal stripe
together.
A
B
3.10 Assembly
min.
650mm
A
min.20 mm
(max.150 mm)
min. 60 mm
D
min. 500 mm
A
B
12 mm
57 mm
28 mm
41 mm
38 mm
31 mm
C. Removable panel
D. Space for connections
ENGLISH
11
min.
450mm
min.
2mm
min. 2 mm
B
C
Advertisement
Table of Contents
