Download Print this page

Sanyo CDF-MS11 Instruction Manual page 39

Advertisement

Machine Translated by Google
ÿ
Manual tuning ... Changes each time the button is
Use the up / down buttons () to tune in.
ÿ
Automatic channel selection : Automatically starts tuning and stops when a broadcast station is received. Broadcast of hope
Press and hold the up / down button () to the up side () or down side () for 0.7 seconds or longer
to start automatic channel selection.
A few words
[ST] lights up when FM stereo broadcast is received.
About the radio mode button ()
Switches from the power off state, CD mode, MD mode, and EXT (changer) mode to radio
mode.
To hear road traffic information About the road traffic information button ()
If you press the road traffic information button () for 1.5 seconds or longer, [TI 1620] will be
displayed and you can listen to the road traffic information. Press the road traffic information
button () again to cancel. Press the radio mode button or CD / MD / EXT (changer) mode button
to switch to each mode.
A few words
Even in CD mode / MD mode / EXT (changer) mode, you can listen to road traffic information
by pressing this button for 1.5 seconds or longer.
pressed.
Repeat until you find a station.
FM... 0.1MHz
AM... 9kHz
Radio
38

Advertisement

loading