Download Print this page

Sanyo CDF-MS11 Instruction Manual page 32

Advertisement

Machine Translated by Google
To listen to MD (1)
To insert a disc
1
Insert the disc in the direction of c, with the side with c facing up. The
MD will start playing automatically. [MD] on the display changes to [].
A few words
¡ If an optical disc is already inserted, remove the disc and then insert the next disc.
CD and MD cannot be inserted at the same time.
¡ As the MD recording takes a long time (normal ÿ LP2 ÿ LP4), the sound quality will differ when
the MD is played. If you want to hear the best sound quality, play it on the MD recorded in
normal mode.
To adjust the volume / sound quality
2 Adjust the volume and sound quality according to "To adjust the audio" (page
19).
3
When the last song has finished playing When
the last song finishes playing, the performance resumes from the beginning of the first song.
Operation of MD
Press the eject button () to eject the
disc . (When ejected, the power is turned off.)
A few words
When you take out the MD and start playing again, the performance starts from the beginning of the first song
on the disc. * If you turned off ACC during a performance, the next time you turned on ACC, you were playing
before.
I will start playing from the continuation.
* If you leave the disc as it is after pressing the eject button, the disc will be protected.
Therefore, the disc is automatically inserted and set in this unit after about 10 seconds. ([DISC]
lights up.) At this time, the performance does not start automatically.
31
Eject button
MD

Advertisement

loading