Advertisement
Machine Translated by Google
To adjust BAS bus / TRE treble / BAL balance / FAD fader
ÿ Select the mode you want to adjust with the select button (). * Each time
you press the button, the mode switches as shown in the table below.
(2) Adjust with the level adjustment knob ().
* Perform while each mode (BAS / TRE / BAL / FAD) is displayed (about 5 seconds). Turn the level
adjustment knob after the mode display disappears to adjust the VOL volume.
* Turn to the right in the + direction (UP), and turn to the left in the-direction (DOWN).
Mode switching
BAS
TRE (treble)
BAL (balance)
FAD
VOL
At the time of CD / MD
TRK
BAS
TRE (treble)
BAL (balance)
FAD
VOL
Turn to the left (DOWN) Turn to the right (UP)
Bass weakens
The treble weakens
The volume of the right speaker
decreases The volume of the
front speaker decreases
Volume goes down
Performance track returns Performance track advances 1 to MAX
Bass weakens
The treble weakens
The volume of the right speaker
decreases The volume of the
front speaker decreases
Volume goes down
Bass becomes stronger -7 to +7
The treble gets stronger
The volume of the left speaker
decreases. The sound volume
of the rear speaker decreases.
Volume goes up
Bass becomes stronger -7 to +7
The treble gets stronger
The volume of the left speaker
decreases. The sound volume
of the rear speaker decreases.
Volume goes up
-7 to +7
L9 ~ 0 ~ R9
R9 ~ 0 ~ F9
Cooperativ
0-31
-7 to +7
L9 ~ 0 ~ R9
R9 ~ 0 ~ F9
0-31
20
Advertisement
