Advertisement
Machine Translated by Google
ÿ When it is decided whether or not the illumination is dimmed, press the select button () to confirm.
To do.
To set the dimming time (set after step ÿ above)
If you press the ATP button () while "ILM Y" is displayed, the ILM ON time is displayed.
If you press the BAS-X button () while "ILM Y" is displayed, the ILM OFF time will be displayed.
"Time" adjustment ...... Press the up / down button (). If you keep pressing it, it will change
quickly. Set "minutes" ...... Press the up / down button (). If you keep pressing it, it will change
quickly.
* At the time of shipment from the factory, it is set from 18:00 to 6:00 for "ILM Y". *
For cars with an orange / white line (ILM) cord connected to the illumination circuit, the car light
When is lit, the light is dimmed regardless of the dimming time
setting. When the time is decided, press the select button () to confirm.
If you set [SCROLL Y] to scroll the title automatically, the
display will scroll automatically if the disc name, group name, track name, station name, etc. are
too long to be displayed at once. continue. ÿ Press the preset button 2 (). [SCROLL Y] or
[SCROLL N] is displayed
Will be
done. * When shipped from the factory, it is set to [SCROLL N].
With this setting, if the disc name, group name, track name, station name, etc. are too long
to be displayed at once, press the display button () for 1.5 seconds or longer to scroll the
display once.
(2) If [SCROLL N] is displayed in step (1), turn the level adjustment knob () and turn it.
Display [SCROLL Y].
ÿ After deciding whether to scroll once or continue scrolling until it is pressed again, set
Press the lect button () to confirm.
To select the presence or absence of button operation sound
ÿ Press the preset button 1 (). [BEEP Y] or [BEEP N] is displayed.
* When shipped from the factory, it is set to [BEEP Y].
(2) Turn the level adjustment knob () to select. BEEP Y
ÿ ÿ BEEP N switches each time the knob is turned. If there is a button
operation sound, [BEEP Y] is displayed. If there is no button operation
sound, [BEEP N] is displayed. (3) After deciding whether or not there is
an operation sound, press the select button () to confirm.
Auto travel preset
Bus expander
Cooperativ
twenty two
Advertisement
