Advertisement
Machine Translated by Google
To make various settings
You can adjust the brightness of the display, select automatic scrolling of the title, and select whether or not to use
the button operation sound.
Display button
1
Press the select button () until [Settings] is displayed (blinks) (4
seconds or longer).
To change the brightness of the display
2
ÿ Press the preset button 3 (). [LCD] and current brightness level (0-10)
It is displayed.
You can set the level for each of ILM ON (light on) and ILM OFF (light off). Change the
level in each state (light on / off). * At the time of shipment from the factory, when ILM
is ON (light is on) [LCD 6], when ILM is OFF (light is off)
Cooperative operation
Is set to [LCD 6].
(2) Use the level adjustment knob () to adjust the display so that it is easy to see.
To make it brighter, turn it to the right to raise the level (increase the number). To
make it darker, turn it to the left to lower the level (decrease the number).
If you select [ILM Y] to select whether or not the illumination is
dimmed, the illumination will be dimmed automatically within the preset time *. * Set the
dimming start time (ILM ON time) and dimming end time (ILM OFF time).
when.
ÿ Press the preset button 4 (). [ILM Y] or [ILM N] is displayed.
(2) You can change the setting by turning the level adjustment
knob (). ILM Y ÿ ÿ ILM N switches each time the knob is
turned. If the illumination is dimmed, [ILM Y] is displayed. If there
is no illumination dimming, [ILM N] is displayed.
twenty one
Auto travel preset
ATP button
Preset buttons 1-4
Bus expander
BAS-X button
Level adjustment
knob Select button
Advertisement
