Night Light - Honeywell 5 Series Installation And Operation Manual

Connect a Push Button
Follow these steps to change the ring and halo light color for an existing
doorbell, too.
1. Press and hold the Setting button on
the doorbell for three seconds.
The halo light will circle.
2. Press the push button.
3. Within 12 seconds of pressing the
push button, press the Music button
to select the ring for that push
button.
4. Within 12 seconds of pressing the
doorbell, press the Sunlight button
to select a halo light color for that
push button.
Night-light
Your doorbell can also be used as a night-light.
1. Plug the doorbell into a wall outlet.
2. Press and hold the Night-light button to select the
halo color.
3. Release the Night-light button when you see the color
you want.
Secret Knock
You can set up a Secret Knock that makes a different ring
and halo light color for each push button. The Secret Knock is triggered by
pressing the push button quickly 3 times.
1. Press the push button 3 times quickly.
2. Within 12 seconds of pressing the push button, press the Music button to
select the ring for the Secret Knock.
3. Within 12 seconds of pressing the push button, press the Sunlight button
to select a halo light color for the Secret Knock.
5