Table of Contents
Advertisement
[Color adjust] menu
On the menu screen, select [Color adjust] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
[Image mode]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1)
Press as to select [Image mode].
2)
Press the <ENTER> button.
3)
Press as to switch the item.
f The items will switch each time you press the button.
[Dynamic]
[Standard]
[Cinema]
[Blackboard
(Green)]
[Colorboard]
[User image]
4)
Press the <ENTER> button.
Note
f Under an image mode other than [User image], if the items such as [Contrast] and [Brightness] are adjusted, [Image mode]
will automatically switch to [User image] and the adjusted values will be saved as the setting values of [User image]. Note
that the original setting values will be discarded if [User image] is selected.
[Contrast]
You can adjust the contrast of the colors.
1)
Press as to select [Contrast].
2)
Press the <ENTER> button.
3)
Press as to adjust the level.
Operation
Press the a button. Brightens the screen and makes the color deeper.
Press the s button. Darkens the screen and makes the color lighter.
Attention
f Adjust [Brightness] first when you need to adjust [Brightness] and [Contrast].
[Brightness]
You can adjust the dark (black) part of the projected image.
1)
Press as to select [Brightness].
2)
Press the <ENTER> button.
3)
Press as to adjust the level.
Operation
Press the a button. Increases the brightness of the dark (black) parts of the screen.
Press the s button. Reduces the brightness of the dark (black) parts of the screen.
54 - ENGLISH
Chapter 4 Settings - [Color adjust] menu
The light output is maximized for use in bright areas.
The picture becomes suitable for moving images in general.
The picture becomes suitable for movie sources.
The picture becomes suitable for projecting on a black board (green board) such as classroom.
The picture becomes suitable for projecting on a color board. To select [Colorboard], press the
<ENTER> button, the [Colorboard] screen is displayed. To select [Red], [Blue], [Green] or
[Yellow], and press the <ENTER> button.
Select this item if manual adjustment of the image is needed.
If [User image] is selected, [Contrast], [Brightness], [Color], [Tint], [Color temp.], [Red], [Green],
[Blue] or [Sharpness] can be adjusted manually. The adjusted values will be saved as the setting
values of [User image].
Adjustment
Adjustment
Adjustment range
0 ~ +63
Adjustment range
0 ~ +63
Advertisement
Table of Contents
