[Color Adjust] Menu; [Image Mode]; [Contrast]; [Brightness] - Panasonic PJLink PT-TW351RD Operating Instructions Manual

[Color adjust] menu

On the menu screen, select [Color adjust] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 41) for the operation of the menu screen.
fAfter selecting the item, press as to set.

[Image mode]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press as to select [Image mode].
2) Press the <ENTER> button.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Dynamic]
[Standard]
[Cinema]
[Blackboard
(Green)]
[Colorboard]
[User image]
4) Press the <ENTER> button.

[Contrast]

You can adjust the contrast of the colors.
1) Press as to select [Contrast].
2) Press the <ENTER> button.
3) Press as to adjust the level.
Operation
Press the a button. Brightens the screen and makes the color deeper.
Press the s button. Darkens the screen and makes the color lighter.
Attention
f Adjust [Brightness] first when you need to adjust [Brightness] and [Contrast].

[Brightness]

You can adjust the dark (black) part of the projected image.
1) Press as to select [Brightness].
2) Press the <ENTER> button.
3) Press as to adjust the level.
Chapter 4 Settings - [Color adjust] menu
The light output is maximized for use in bright areas.
The picture becomes suitable for moving images in general.
The picture becomes suitable for movie sources.
The picture becomes suitable for projecting on a black board (green board) such as classroom.
The picture becomes suitable for projecting on a color board. To select [Colorboard], press the
<ENTER> button, the [Colorboard] screen is displayed. To select [Red], [Blue], [Green] or [Yellow],
and press the <ENTER> button.
The picture quality is displayed after the manual adjustment of [Color adjust].
Adjustment Adjustment range
0 ~ +63
ENGLISH - 49