Usb Configuration - GIGA-BYTE TECHNOLOGY G292-Z20 User Manual

5-2-9 USB Configuration

Parameter
USB Configuration
USB Controller
USB Devices:
Legacy USB Support
XHCI Hand-off
USB Mass Storage Driver
Support
(Note)
Port 60/64 Emulation
USB hardware delays and
time-outs
USB transfer time out
Device reset time out
(Note) This item is present only if you attach USB devices.
Description
Displays the supported USB controllers.
Displays the USB devices connected to the system.
Enable/disable the Legacy USB support fuction. AUTO option disables
legacy support if no USB devices are connected. DISABLE option will
keep USB devices available only for EFI applications.
Options available: Auto/Enabled/Disabled. Default setting is Enabled.
Enable/Disable the XHCI (USB 3.0) Hand-off support.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the USB Mass Storage Driver Support.
Options available: Enabled/Disabled. Default setting is Enabled.
Enables the I/O port 60h/64h emulation support. This should be enabled
for the complete USB Keyboard Legacy support for non-USB aware OS.
Options available: Enabled/Disabled. Default setting is Enabled.
The time-out value for Control, Bulk, and Interrupt transfers.
Options available: 1 sec/5 sec/10 sec/20 sec. Default setting is 20 sec.
USB mass storage device Start Unit command time-out.
Options available: 10 sec/20 sec/30 sec/40 sec. Default setting is 20 sec.
- 75 - BIOS Setup