Pci Subsystem - GIGA-BYTE TECHNOLOGY G292-Z20 User Manual

5-2-8 PCI Subsystem

Parameter
PCI Bus Driver Version
PCIE_#
(Note1)
PCI Express Slot # I/O ROM
MEZZ
MEZZ I/O ROM
Onboard LAN1 / LAN2 Controller
Onboard LAN1 / LAN2 I/O ROM
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available LAN controller.
Description
Displays the PCI Bus Driver version information.
Change the PCIe lanes.
Options available: Auto/x16/x8x8/x8x4x4/x4x4x8/x4x4x4x4/
Disabled. Default setting is Auto.
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
(Note1)
Options available: Enabled/Disabled. Default setting is Enabled.
Change mezzanine PCIe lanes.
Options available: Auto/x16/x8x8/x8x4x4/x4x4x8/x4x4x4x4/
Disabled. Default setting is Auto.
When enabled, this setting will initialize the device expansion
ROM for the related U.2 device.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN1 / LAN2 devices.
(Note2)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN1 / LAN2 devices, and initializes
device expansion ROM.
(Note2)
Options available: Enabled/Disabled. Default setting is Enabled.
- 73 - BIOS Setup