Serial Port Console Redirection - GIGA-BYTE TECHNOLOGY G292-Z20 User Manual

5-2-6 Serial Port Console Redirection

Parameter
COM1/COM2 Serial Over
LAN Console Redirection
Legacy Console Redirection
Serial Port for Out-of-Band
Management / Windows
Emergency Management
Services (EMS) Console
Redirection
(Note)
COM1/COM2 Serial LAN/
Legacy/Serial Port for Out-
of-Band EMS Console
Redirection Settings
(Note) Advanced items prompt when this item is defined.
Description
Select whether to enable console redirection for specified device. Console
redirection enables the users to manage the system from a remote
location.
(Note)
Options available: Enabled/Disabled. Default setting is Disabled.
Selects a COM port for Legacy serial redirection. The options are
dependent on the available COM ports.
Selects a COM port for EMS console redirection. EMS console redirection
allows the user to configure Console Redirection Settings to support Out-
of-Band Serial Port management.
Options available: Enabled/Disabled. Default setting is Disabled.
Press [Enter] to configure advanced items.
Please note that this item is configurable when COM1 Serial Over
LAN/Serial Port for Out-of-Band Management EMS Console Redirec-
tion is set to Enabled.
Terminal Type
Š
– Selects a terminal type to be used for console redirection.
– Options available: VT100/VT100+/ANSI /VT-UTF8. Default setting
is ANSI.
- 69 - BIOS Setup