Philips 86BDL4152T/75 User Manual page 63

86BDL4152T
The options are: {Off} / {On} (default).
Configuration2 reset
Reset all settings in Configuration2 menu to the factory preset values.
6.2.7. Advanced option menu
Input resolution
Configuration 2
IR control
Keyboard control
Advanced option
Tiling
Date and time
Input
Off timer
Schedule
DDC/CI
HDMI with One Wire
Auto signal detection
Input resolution
Set the resolution of VGA input. This is only required when the display is
unable to detect the VGA input resolution correctly.
NOTE: T his item applies to VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 / 1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the power
and turning it on again.
IR control
Select the operation mode of remote control when multiple displays are
connected via an RS232C connection.
• {Normal} - All displays can be operated normally by the remote
control unit.
• {Primary} - Designate this display as the primary display for remote
control operation. Only this display can be operated by the remote
control.
• {Secondary} - Designate this display as the secondary display. This
display can not be operated by the remote control, and will only
receive the control signal from the primary display via the RS232C
connection.
• {Lock All} / {Lock all but Volume} / {Lock all but Power} - Lock the
remote control function of this display. To unlock, press and hold the
[ ] INFO button on the remote control for 5 (five) seconds.
NOTE: W hen the main OSD menu is vanished, the Primary/
Secondary OSD will be displayed for 3 seconds. Or, press
[OK] button to display the Primary/Secondary OSD when
there is no other OSD.
1. In the Primary OSD, press [ ] or [ ] button to adjust the value
of {Control Monitor ID}, and press [ ] or [ ] button to adjust the
value of {Control Group ID}.
Keyboard control
Select to enable or disable the display keyboard (control buttons)
function.
• {Unlock} - Enable the keyboard function.
Auto
Action
Action
Action
Action
Off
Action
On
Off
Action
52
• {Lock All} / {Lock all but Volume} / {Lock all but Power} - Disable
the keyboard function.
NOTE: T o enable or disable the keyboard control lock, press
[ ] and [ ] buttons simultaneously and keep pressing
continuously for more than 3 seconds.
Tiling
Create a single large-screen matrix (video wall) that consists of up
to 150 sets of display (up to 10 sets in vertical side and 15 sets in
horizontal side). This function requires a daisy-chain connection.
• Switch on delay: Set the power-on delay time (in seconds). The
default option {Auto} allows a sequential powering-on for each
display by their ID number when multiple displays are connected.
The options are: {Off (0) / Auto(1) / 2-255}
• Brightness: {Normal}/{ACS}
• {Normal}: Adjust the brightness of overall image and
background screen (backlight).
• {ACS}: Apply the brightness value (backlight) which is adjusted
by MIC tool. The default value before adjustment is the same as
OSD brightness value, e.g., 70.
• Type: {Manual}/{Tiling tool}
• Enable: {Yes}/{No}
• Source resolution: {Full HD}(Default)/ {4K}
• H monitors - Set how many displays in horizontal side.
• V monitors - Set how many displays in horizontal side.
• Position - Set the position of this display in the screen matrix.
• Frame comp. - Turn the frame compensation function On or Off.
If you select {On}, the display will adjust the image to compensate
for the width of the display bezels in order to accurately display the
image.
NOTE: S creen format function in tiling using cascade mode is not
supported.
Frame comp. - On