86BDL4152T
• The PIP function is available only for certain signal source
combinations as shown in the table below.
Main
Sub
DP
O
O
O
O
OPS
O
O
X
O
HDMI1
O
X
O
O
VGA
O
O
O
O
HDMI2
O
O
O
O
HDMI3
O
O
O
O
Media Player
O
O
O
O
Browser
O
O
O
O
SmartCMS
O
O
O
O
PDF Player
O
O
O
O
Custom
O
O
O
O
DVI
O
O
O
O
(O: PIP function is available, X: PIP function is unavailable)
• The availability of PIP function depends on the resolution of input
signal being used.
6.2.5. Configuration1 menu
Switch on state
Select the display status that will be applied when you connect the
power cord next time.
• {Power off} - The display will remain off when the power cord is
connected to a wall outlet.
• {Forced on} - The display will turn on when the power cord is
connected to a wall outlet.
• {Last status} - The display will return to the previous power status
(on/off/standby) when removing and replacing the power cord.
Auto adjust
Use this function to automatically optimize the display of VGA input
image.
NOTE: T his item applies to VGA input only.
Power save
Use this setting to reduce the power automatically.
• {RGB} - Select {On} to allow the display enter power saving mode
when no signal is detected from the PC (RGB color space) inputs
after 10 seconds.
• {Video} - Select {On} to enter power saving mode when no signal
is detected from VIDEO (YUV color space) inputs after 10 seconds.
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
X
O
O
O
O
O
O
O
O
X
X
X
O
O
X
O
X
X
O
O
X
X
O
X
O
O
X
X
X
O
O
O
X
X
X
X
O
O
O
O
O
O
Panel saving
Enable or disable the panel saving functions and thus reduce the risk of
"image persistence" or "ghost-imaging".
• {Cooling Fan} - Adjust the rotation speed of cooling fan. Select
{Auto}, the cooling fan will turn on/off according to the display's
temperature.
O
O
O
O
The options are: {Auto} / {Off} / {Low} / {Medium} / {High}.
O
O
NOTES:
O
O
• The default {Auto} option will start running the cooling fan if
O
O
the temperature of 45°C (113°F) is reached, and stop running
O
O
the cooling fan if the temperature of 43°C (109°F) is reached.
X
O
X
O
• A warning message will be shown on the screen if the
X
O
temperature reaches 58°C (136°F). All key functions except
X
O
[ ] key will be disabled.
O
O
O
O
• Once the temperature reaches 60°C (140°F), the display's
power will be shut down automatically.
• {Brightness} - Select {On} and the image brightness will be reduced
to an appropriate level. The Brightness setting in the Picture menu
will be unavailable when selected.
• {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} seconds
/ {Off}) for the display to slightly expand the image size and shift
the position of pixels in four directions (up, down, left, or right).
Activating Pixel Shift will disable H Position, V Position and Zoom
Mode in the screen menu.
Network control port
Select the network control port.
The options are: {RS232} / {Card OPS RS232} / {LAN ->RS232}.
NOTE: A fter connecting to your OPS device, the option {Card OPS
RS232} will be available.
Boot on source
Clear all cookies, bookmarks, history list and text used for automatic
filling.
Configuration1 reset
Select the input source when booting.
Input: select input source when booting.
Playlist: select playlist index for Media player, Browser and PDF player.
0: no playlist. Same as switching source from OSD. 1~7: playlist number.
Factory reset
Reset all settings in the OSD menu of {Picture}, {Screen}, {Audio}, {PIP},
{Configuration1}, {Configuration2}, {Advanced option} and {Input} to
the factory preset values.
Press [ ] or [ ] button to select {Reset}, and press [OK] button to
perform the reset.
Factory reset
50
Cancel
Reset