Philips 86BDL4152T/75 User Manual page 62

6.2.6. Configuration2 menu
  
 
 
 
 
 


 
 
 
 
 
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {0 ~ 120} seconds.
OSD H-position
Adjust the horizontal position of OSD menu.
OSD V-position
Adjust the vertical position of OSD menu.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when the
input signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {Off, 1 ~ 60} seconds.
Logo
Enable or disable to show the
display.
OSD rotation
Rotate the OSD Menu.
The options are:
• {Landscape} (Default)
• {Portrait}
Monitor ID
Set ID number for controlling the display via the RS232C connection.
Each display must have a unique ID number when multiple sets of
display are connected. Monitor ID number range is between 1 to 255.
The option are: {Monitor group} / {Tiling matrix} / {Auto ID}
Monitor Id
Monitor Id
Monitor group
Tiling matrix
Auto ID
• {Monitor group}
The options are: {1-255}. The default setting is 1.
• {Tiling matrix}
Tiling matrix number range is between 1 to 15. 1 is the default
setting. The {Auto ID} setup function enables setting up {Monitor
ID} of connected machine according to {Tiling matrix} settings.



 





 
logo when you turn on the
1
1
1
End
Example: Tiling matrix sets to 4
1 2
5 6
9 10
13 14
• {Auto ID}
The option are: {Start} / {End}. The default setting is {End}.
Switch to Start to set up the IDs of machines backward from
•
current one.
• Once the setup is completed, the option exits from End
automatically.
• To use this function, serially connect all machines with RS-232
cable and set their Control ports to RS-232 too.
Heat status
This function allows you to check the thermal status of display at any
time.
Monitor information
Show information about your display, including model number, serial
number, operating hours and software version.
Monitor information
Model name
Serial no
Operation hours
SW Version
DP Version
The options are: {DP 1.1} / {DP 1.2} / {DP 1.2 multi}. The default setting
is {DP 1.1}.
Human sensor
This function will turn the backlight On when it senses the presence of
human and turn it off after a specified period of time.
The options are: {Off, 10 ~ 60} minutes.
HDMI edid
The option are: {HDMI 1.4} / {HDMI 2.0}. The default setting is {HDMI
1.4}.
NOTE: HDMI 2.0 option is to support HDMI 2.0 equipment.
Image rotation
Set the picture of main Window to rotate by 270 degrees.
The options are: {Off} (default) / {On}.
Window selection
Select the window for adjusting the settings. The selected window will
be highlighted with green frame.
The options are: {Main}(Default), {Sub 1}, {Sub 2} , {Sub 3} .
Power LED light
Select to control the power LED.
51
86BDL4152T
3 4
7 8
11 12
15 16
XXBDLXXXXX
XXX
XHXM
VXXX