86BDL4152T
1.5.
Mounting in Portrait Orientation
This display can be installed in portrait position.
1. If the table stand is attached, remove it first.
2. Rotate the display counterclockwise by 90°. The "
1.5.1. How to remove the logo
1. Prepare a piece of paper with a cutting area of logo as a protector to
prevent the front bezel from scratching.
2. Use a knife and carefully remove the logo sticker with the paper placing
beneath.
3. Tear off the logo sticker.
NOTE: W e recommend you contact a professional technician when installing the display on a wall. We are not responsible for any damage to the
product if the installation is not performed by a professional technician.
" logo should be in a vertical position when facing the display from the back.
90
90
2
1
6
3