Sony WH-1000XM2/B Help Manual page 32

Touch [WH-1000XM2].
4
You hear voice guidance "BLUETOOTH connected".
Hint
The above procedure is an example. For details, refer to the operating instructions supplied with your smartphone.
If the smartphone was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset.
While the headset is on, you can make an A2DP connection (music playback) by double-tapping the center of the touch sensor
control panel on the
Note
If the last-connected BLUETOOTH device is put near the headset, the headset may connect automatically to the device by simply
turning on the headset. In this case, deactivate the BLUETOOTH function on the BLUETOOTH device or turn off the power.
If you cannot connect your smartphone to the headset, deactivate pairing on your smartphone and perform pairing again. For
details, refer to the operating instructions supplied with your smartphone.
Related Topic
How to make a wireless connection to BLUETOOTH devices
Pairing and connecting with an Android smartphone
Listening to music from a device via BLUETOOTH connection
right unit lightly (about 0.4-second interval).
4-697-257-11(6) Copyright 2017 Sony Corporation
32