Operation Mode; Wireless Router Mode; Access Point Mode - TP-Link C50V5 User Manual

Ac1200 wireless dual band router
Table of Contents

Advertisement

Chapter 4
4. 3.

Operation Mode

The router supports two operation modes: Wireless Router mode and Access Point
mode.
4. 3. 1.

Wireless Router Mode

The default Wireless Router mode is required most commonly. In this mode, the device
enables multiple users to share the internet connection via ADSL/Cable Modem.
For hardware connection, refer to
4. 3. 2.

Access Point Mode

In this mode, this device can be connected to a wired network and transform the wired
access into wireless one. If you already have a wired router, you can use this mode.
Refer to
Configure the Router in Access Point Mode
Internet
Ethernet1Ethernet2
Ethernet3
Ethernet4
Ethernet2
Wired Router
1. Find the router's Internet port, and connect it to the Ethernet port (LAN port) of your
existing wired router. Then connect the power adapter and turn on the router.
2. Connect your computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and Wireless Password printed on the label at the bottom of the
router. For details, refer to
3. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
4. Go to
Operation
Mode.
5. Select the
Access Point
Connect Your
Internet
Router
Connect Your
Router.
mode and click Save.
Router.
session for detailed information.
Devices
15

Advertisement

Table of Contents
loading

Table of Contents