HIKVISION DS2CD2725FWDIZS User Manual page 46

2. Select the Time Zone of your location from the drop-down menu.
3. Configure the NTP settings.
(1) Click to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
(3) (Optional) You can click the Test button to test the time synchronization
function via NTP server.
Network Camera User Manual
Figure 6-4 Time Settings
Figure 6-5 Time Sync by NTP Server
35