HIKVISION DS2CD2725FWDIZS User Manual page 171

You can also click
newly searched devices will be added to the list.
You can click
you can click
the right side, or click
 Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of
the device will be displayed in the Modify Network Parameters panel on the
right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Admin Password
field and click

For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in
order to increase the security of your product.

Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Network Camera User Manual
to refresh the online device list manually. The
or on each column heading to order the information;
to expand the device table and hide the network parameter panel on
to show the network parameter panel.
160
to save the changes.